Priming Mi-One Coils

1. Screw the coil onto the chimney just enough so the coil doesn’t fall off but not all the way tight. 
2. Fill the Mi-One tank with e-liquid to the max fill line. 
3. Insert the airflow with the loosely tighten coil into the Mi-One and let it soak for about 5 to 7 minutes.  Please note that the airflow piece does not need to be tightened into the tank on this step. 
4. Remove the airflow with the attached coil out of the tank, wipe off with a napkin the excess e-liquid and then tighten your coil just hand tight. Please note that you do not want to tighten the coil extremely tight or you will break the rubber seal. If your rubber seal is broken your kit did include two extra seals. 
5. Insert your airflow and attached coil into the tank and tighten the airflow into the tank.
6. Turn your device on by pressing the fire button 5 times until you see the flashing light.
7. Take small draws a couple of times to ensure your coil is all the way saturated.

Get in touch with Mi-One® Brands
Customer Service Hours:
Mon - Fri 8AM - 5PM (AZT)
Email us at [e-mail] 
Call us at 1-800-768-9982