How to use Puffco Peak

How to use Puffco Peak

1. Make sure that the Peak is fully charged. The white light on the unit will pulse
while charging and will automatically turn off once fully charged. The Peak
takes about 2.5 hours to fully charge. Use only the micro USB charger included
with the Peak.
2. Fill the glass attachment with water, just above the air-holes. Do not allow
any water in the lower section of the glass and do not fill the glass attachment
while attached to the base.
3. Attach the glass to the base of the Peak, aligning the inlet hole on the front of
the glass with the atomizer. Then carefully push the front of the glass into the
base, then the back.
4. To lock/unlock the device, hold down the button for 3-5 seconds.
5. Single click to toggle through heat settings (Blue = lowest, White = hottest).
6. Use loading tool to place contents on the bottom surface of the bowl.
7. Place carb cap on top of atomizer.
8. Double click to initiate heat-up; the device will take about 20 seconds to heat up
fully. Press and hold button at any point to exit heating cycle.
9. Device will vibrate and lights will flash 3 times when ready for use.
10. Use a cotton swab to clean the bowl after each use.

How to load Puffco Peak

• Use the included loading tool.
• Cold start method: Load the contents onto the bottom of the
bowl rather than along the sides of the bowl.
• Hot start method: Load the contents while the atomizer is warm.
• Double click the button to engage the heating element.
• Place the carb cap on the top of the atomizer.
• Use no more than .2g – otherwise, the hash will overflow into the atomizer

What is boost mode

• Allows the user to extend sesh by 15 seconds mid-cycle by
clicking 2x while in use.
॰ Larger dabs
॰ Sharing in a group setting
• Double click as many times as needed.

Different heat settings

• Each setting isn’t better or less than—experiment to
find the perfect setting for you.
॰ Blue: Low temp, high flavor
• Expresses the nuances of your concentrates with
high flavor and low vapor production.
॰ Green: Med temp, balanced
• Produces both quality flavor and good vapor production.
॰ Red: High temp, strong
• Offers higher vapor production, while maintaining flavor.
॰ White: Peak temp, advanced
• Maximum vapor production and the strongest effects.

Best way to attach/detach atomizer from base

• Attach/detach the atomizer to and from the base fully assembled with
atomizer jacket.
॰ The top of the Peak atomizer has notches that lock the jacket into place,
making it very difficult to fully attach the atomizer without it attached.
• If the atomizer is stuck when trying to remove, warm up atomizer first. Let cool
before soaking in IPA.

Get in touch with Mi-One® Brands
Customer Service Hours:
Mon - Fri 8AM - 5PM (AZT)
Email us at [e-mail] 
Call us at 1-800-768-9982