Puffco Peak flashing rainbow lights
• This can be caused by a connection issue between the base and atomizer.
• Remove the atomizer, clean the connection pins with an IPA-soaked cotton
swab and reattach.
• Soak the entire atomizer in IPA, let it fully dry and then reattach the atomizer.
॰ Screw the atomizer tightly into the base—sometimes a loose connection
can be the reason for the issue.
Getting rainbow lights even with new atomizer
• Try "back threading."
॰ Turn the atomizer counterclockwise for a half turn to ensure the atomizer
threads are properly lining up to the threads of the base.
॰ There will be a light “click” as the atomizer lines up with the threads.
॰ Tighten the atomizer securely to the base.
Red light flashing while charging
• Device has overheated.
॰ Let the Peak cool down for a little while and normal
functionality/charging will resume.
flashing red light 5X and does not heat
• Indicates that there is a short circuit somewhere in the device.
॰ Visit puffco.com/warranty for further assistance
Atomizer heating up, but very little vapor production
• This can be due to the glass not being properly attached or lined up
to the base of the device.
॰ Remove the glass and reattach the piece, carefully aligning the inlet hole
with the atomizer first and then popping the rear end of the glass into place.
॰ Once in, slightly turn to the right and then back in alignment with the
atomizer to ensure the silicone from the base is not blocking the air path
from the atomizer.
Buzzing sound
• A light buzzing is completely normal when the heating element is engaged.
॰ It may be more apparent and noticeable when the carb cap is removed.
Get in touch with Mi-One® Brands
Customer Service Hours:
Mon - Fri 8AM - 5PM (AZT)
Email us at support@mipod.com
Call us at 1-800-768-9982
Comments
0 comments