Power On: Press the fire button on the battery five times repeatedly fast and the LED light behind the button will flash a rainbow color, Indicating it is turned on.
Power Off: Press the fire button on the battery five times repeatedly fast and the LED light behind the button will flash a rainbow color, indicating it is turned off
Adjusting the heat settings:
Press the fire button 4 times quickly to change the temperature.
- Green = Low (2.7V)
- Blue = Medium (3.1V)
- Red = High (3.6V)
Activating the preheat setting:
Press the fire button two times quickly to activate the preheat mode. You will know is in preheat when the LED light behind the button stays in a rainbow color. When preheat is done the LED light will flash and then go away. This will heat the cartridge slowly at ‘extra low’ for 10 seconds. To stop the preheat feature at any time, just press the fire button once.
Charging your Swon:
To charge your Swon battery simply plug the provided micro USB charging cord into a 1AMP wall adapter, plug the corresponding end of your charger into the Swon charging port, a small red light will illuminate by the charging port to indicate it is charging. After the Swon is done charging the small red light will turn off. The fire button, will never illuminate when charging.
Recommended charging cord and adapter
If your provided charging cord is lost or broken, you can use any 1AMP charging cable and wall adapter. Furthermore, you can easily find a compatible charger at a local convenience store. Always, check the packaging and the wall adapter to ensure that the charger is 1AMP.
Incompatible charging sources
The following types of chargers and USB outlets should not be used to charge your Swon battery:
- Fast charging cell phone chargers
- Gaming consoles
- Car charger
If your battery no longer charges/holds a charge, you may be qualified for a warranty.