Remove the pod from the Mi-Pod 2.0 Device before charging.
Simply charge the Mi-Pod 2.0 by connecting it with a 1 AMP wall adapter via Micro-USB cable supplied in kit. The white LED is lighting and showing the current power status. During the charging duration, the LED lights will change. When the Mi-Pod 2.0 is charging, you will get solid lights and flashing lights. 4 LED Flashes mean voltage lower than 3.2V. The Bottom LED is on, and the other 3 LED flash, means low battery 3.2V-3.55V. The bottom 2 LED lights are on, and top 2 LED lights are flashing, means half battery 3.55-3.8V. The bottom 3 LED lights are on and the Top 1 LED light flashes, the battery is ¾ full 3.8-4.05V. 4 LED are on and keeps lighting, the battery is above 4.05V. When the Mi-Pod 2.0 is fully charged 4.15V, the LED light will flash 8 times and will turn off. If the Mi-pod 2.0 is fully charged when plugging in to the wall charge the White 4 LED Light will flash 8 times to indicate the Mi-pod 2.0 is fully charged. ONLY CHARGE THE MI-POD 2.0 DEVICE WITH 1AMP WALL CHARGERS AND THE SUPPLIED MICRO-USB CABLE. INDOOR CHARGING ONLY.
LED INDICATORS
LED Power Display:
4 LED Lights On 4.05-4.2V-------------Full Battery
3 LED Lights On 3.8-4.05V ------------3/4 Battery
2 LED Lights On 3.55-3.8V ------------Half Battery
1 LED Light On Lower than 3.55----Low Battery
SAFETY PROTECTION
White LED Light Flashes 8 times: ------------Low Voltage Protection
Over Using (Seconds Cut Off)
White LED Light Flashing 3Times: ------------Short Circuit Protection
Low Resistance Protection
White LED Light Flashes 5 times: ------------Overtime Puffs
FULLY CHARGED
White LED Light Flashes 4 times and turns off: ------------Fully charged Mi-pod 2.0
Get in touch with Mi-One® Brands
Customer Service Hours:
Mon - Fri 8AM - 5PM (AZT)
Email us at support@mipod.com
Call us at 1-800-768-9982
Comments
0 comments